Quantcast
Channel: Chevy Truck Forum | GMC Truck Forum - GmFullsize.com
Viewing all 20379 articles
Browse latest View live
↧

Can anyone Photoshop these wheels for me please

August 10, 2017, 1:58 pm
$
0
0
I want the escalade wheels on my 2010 Tahoe

I added another pic just in case for the angle[​IMG][​IMG][​IMG]

Sent from my SAMSUNG-SM-G935A using Tapatalk
↧
Search

NNBS 4/6 Drop... HELP

August 10, 2017, 4:31 pm
$
0
0
I bought my NNBS 2007 Silverado, Extended Cab LTZ 2wd used about a year ago. When I bought it, the rear was already lowered (2" shackles) and as far as I know or could tell, the front was left alone. I finally decided I wanted to go lower and got the DJM 4/6 kit. I personally liked the idea of being able to adjust the rear pinion angle. I know many don't. Anyways, besides grinding shackle mount rivits and flipping the axle, the rear went pretty smooth. I bought factory shackles and ditched...

NNBS 4/6 Drop... HELP
↧
↧

99 Suburban K2500 loose steering

August 10, 2017, 5:40 pm
$
0
0
I have some play in my steering wheel when I turn it to the right, but not the left, its pretty firm on the left side... so I replaced the steering box, pitman arm and hoses... still got the same issue, just put on a new stabalizer, issue is still there. Everything on the front end looks good, cant see any play... What would be causing this play?

When driving, I have to hold the wheel turned a little to the left to get it to stay straight, i just had an alignment done after i replaced the...

99 Suburban K2500 loose steering
↧

what did you do to your gm today?

August 10, 2017, 6:09 pm
$
0
0
i started debadging and pulled trim
↧

Fuel tank relocation

August 10, 2017, 6:10 pm
$
0
0
I'm 18 and new to the whole forum thing. To keep it short and simple, I have a 1992 Chevrolet C1500 Silverado. It's a single cab stepside with a 2-4 belltech drop suspension. I bought my truck out of a salvage yard for $150 it now is getting an ls3 and a t56 from chevrolet performance. I'm trying to get any possible information on moving the bulky and awkwardly placed fuel tank. Maybe to the spare tire location or possibly the bed? Help.
↧
↧

Vortec's 2006 Silverado Z71 Build

August 10, 2017, 6:34 pm
$
0
0
I have a build thread over on GM-Trucks.com, but I figured I'd post one here as well.



I bought this truck on May 5th 2014 for $4800.00. It had 232,600 miles on it, and it definitely needed a lot of TLC. The good thing is that it was optioned exactly how I would have bought it brand new besides the gearing.


-2006 Silverado Z71 in Blue Granite Metallic
-232,600 miles
-3.42 Gearing with G80
-L33 5.3L V8
-Center Console with Bucket Seats




Here are the pictures of the day I brought it...

Vortec's 2006 Silverado Z71 Build
↧

Lift kit and shock hoops for 2 door Yukon

August 10, 2017, 7:11 pm
$
0
0
I was wondering could you run the rcx 6 inch lift and use a tuff country shock hoop for 4 shocks mounted up front. Or what's the best setup
↧

Turbo 4x4 2003 GMC Sierra!

August 10, 2017, 7:53 pm
$
0
0
I am now ready to sell my turbo truck. I have had alot of fun with it I just dont ever use it or drive it. I have put less than 500 miles on it in the last year. Truck is super clean. Has some rock chips and can see sightly where the old fender flares were. Running 16lbs of boost right now but could be turned up if wanted!

DONT ASK FOR TRADES UNLESS YOU HAVE A REALLY CLEAN DURAMAX!!!

Specs

2003 GMC Sierra DSG
4x4 Autotrac
81,000 Original miles!!!
3,000 miles on build!
Bed Cover...

Turbo 4x4 2003 GMC Sierra!
↧
Search

My Truck Through Its Stages

August 10, 2017, 7:57 pm
↧
↧

2010 Tahoe

August 10, 2017, 8:56 pm
$
0
0
Hello all. I'm new here. I purchased a 2010 Tahoe LT a few months ago. Been trying to decide which route to take. Level it on stock 20's and add some 285/55/20's or purchase some escalade 22's and lower it.

Here's a pic[​IMG]

Sent from my SAMSUNG-SM-G935A using Tapatalk
↧

2wd Zone lift wheel and tire sizing

August 10, 2017, 10:26 pm
$
0
0
Hi everyone, I have a 2009 1500 2wd and I've been looking into a lift kit for my truck that would allow me to fit 35s and 20x10s. I want to get the Zone 6.5" lift, but I'm not sure if it would fit so should I go with the Rough Country 7.5" instead?
↧

Leveled nbs trucks with 33s or smaller tires pic request

August 10, 2017, 10:29 pm
$
0
0
I have a leveling kit on my truck (99 nbs) just wanting some pics to see how it looks like.

I just have keys in to level it out and havent decided on tires yet.

Help me out!
↧

Replacing Radiator Core Support without removing radiator? [01 Silverado]

August 11, 2017, 4:40 am
$
0
0
I've looked online and through the forums and haven't found an answer to my question. After looking the at the radiator and some of the miscellaneous brackets, it looks like I can replace the radiator support without removing the radiator. Has anyone tried that? Or am I missing something and it can't be done?
↧
↧

Power folding mirror stuck

August 11, 2017, 6:15 am
$
0
0
recently my passenger side power folding mirror seems to be stuck. I have tried helping it by pulling on it when pressing the button and it still won't budge. Anyone have any suggestions?
↧

Shocks DIY videos

August 11, 2017, 8:41 am
$
0
0
Here are my videos on replacing front and rear shocks for those interested


↧
Search

Radiator DIY Video

August 11, 2017, 8:53 am
$
0
0
Here is my video on the radiator. This might come in handy for someone.

↧

Residential Shop Build

August 11, 2017, 9:07 am
$
0
0
So my wife and I bought a house coming up on 2 years ago (has it been that long already?). It was a basket case of a house, but we had rented it for a little while previous to buying so were well versed in its short comings. The knowledge of the home and the lack of a need for a realtor (or there commission from the home owners) allowed us to get into the house really reasonably even for its state.

3br, 2 bath, 1800sqft w/ the addition on the back.

View attachment 765121 ...

Residential Shop Build
↧
↧

DIY Video: Pitman, Idler, and idler bracket

August 11, 2017, 10:23 am
$
0
0
I just wanted to share my video from fixing my bad pitman/idler arms. Check out my YouTube channel and subscribe

↧

Belltech 2511 drop spindles

August 11, 2017, 10:59 am
↧

Belltech 2212FF shocks

August 11, 2017, 11:07 am
↧
Viewing all 20379 articles
Browse latest View live
Search